Admin Table of Contents
What is the standard height of an electrical outlet in a bathroom?
If you have two sinks, you can place a single outlet between them so long as the receptacle is within the 36-inch range of each sink’s outer edge….Average Bathroom Outlet Height.
| Standard Height for bathroom vanity receptacle | 32-36 inches above the floor |
|---|---|
| ADA bathroom outlet height | 15-48 inches above the floor |
What is code for bathroom outlets?
The minimum requirement for outlet receptacles in a bathroom is one GFCI-protected receptacle served by a 20-amp circuit. This is a bare minimum, however, and most bathrooms will have at least two receptacles, and often as many of four or five.
Where should outlets be placed in a bathroom?
Because bathrooms are wet, they come with their own specific electrical requirements, including but not limited to the following.
- All outlets must be GFCIs (ground-fault circuit interrupters), to protect from electrocution.
- There must be an outlet placed within 36 inches of the edge of the sink.
How high should a receptacle be above a bathroom sink?
The National Electrical Code doesn’t have any specific requirement regarding the height of a receptacle above a vanity. The only thing the NEC requires is that there must be one outlet within 36 inches of the outside edge of the sink, and it must be in the wall adjacent to the basin or countertop.
How high should a GFCI be from a sink?
It must be a GFCI, and it must be within 3 feet of the edge of the sink. Either behind or beside the sink is acceptable — across from the sink on an opposite wall is not. If the bathroom has two sinks, each must have an electrical receptacle within 3 feet.
Do bathroom outlets need to be GFCI?
GFCI protection is required for 125-volt to 250-volt receptacles supplied by single-phase branch circuits rated 150 volts or less to the ground. GFCI receptacles are required in bathrooms, garages, crawl spaces, basements, laundry rooms and areas where a water source is present.
Should bathroom outlets be 15 or 20 amp?
Kitchens and bathrooms should always have 20 amp gfci outlets. However, you must be using number 12 wire for 20 amp gfci or regular outlets If your wiring is number 14 guage then use a 15 amp. So, the wire size and breaker size together should be rated for 20 amps!
How far from sink does outlet need to be?
Every bathroom must have at least one electrical outlet. It must be a GFCI, and it must be within 3 feet of the edge of the sink. Either behind or beside the sink is acceptable — across from the sink on an opposite wall is not. If the bathroom has two sinks, each must have an electrical receptacle within 3 feet.
How close can an electrical outlet be to a toilet?
This often requires a electrical outlets within 4 feet of the toilet. Here are some things to think about when it comes to bathroom outlets and electrical bidet toilet seats.