Admin Table of Contents
How many square feet will 10 yards of dirt cover?
One Cubic Yard = 27 Cubic Feet Length x Width = Square Feet
| 1 YD | 10 YD | |
|---|---|---|
| Depth | ||
| 4 Inches | 81 sq.ft. | 810 sq.ft. |
| 5 Inches | 65 sq.ft. | 650 sq.ft. |
| 6 Inches | 54 sq.ft. | 540 sq.ft. |
How much does 2 yards of dirt cover?
A normal yard of soil would be in the 2,200-2,400 pound range. Now that you know some weights you still have the most asked question when ordering material… How Much Does A Yard Cover? A cubic yard of material can be spread to cover 100 square feet (10×10 foot area) at 3 inches of depth.
How many yards of dirt are in a truckload?
Regarding this, “how many cubic yards of dirt in a dump truck?”, it’s depend on weight capacity and truck bed size, generally there are 10 to 14 cubic yards of dirt in a dump truck when loaded level full. Thus dump truck can usually carry & hold about 10 to 14 cubic yards of dirt.
Does grass grow in 2 inches of soil?
Grass roots grow between 4 and 6 inches long, so a layer of topsoil that’s 6 inches deep provides enough room for the roots to grow.
How many cubic yards does it take to fill in dirt?
So, 216,000 cubic inches divided by 46,656 cubic inches equals 4.63 cubic yards. To fill the rectangular area at a depth of 2 feet 6 inches, you will 4.63 cubic yards of fill dirt. Measure the diameter and depth of the hole you want to fill with dirt.
How much dirt do I need for my project?
Type in inches and feet of your project and calculate the estimated amount of Soil & Dirt in cubic yards, cubic feet and Tons, that your need for your project. The Density of Fill Dirt: 2,410 lb/yd³ or 1.21 t/yd³ or 0.8 yd³/t
How do you convert inches to yards of dirt?
If you take your measurements in inches, it will be easy to convert to cubic yards, the volume unit dirt is sold by. Measure the length, width and depth of the area you want to fill with dirt. Record your dimensions in inches.
How much dirt do I need to fill a 5 foot hole?
The radius of 5 feet is 2.5 feet (30 inches). Calculate the volume of dirt needed to fill in the hole using pi (3.142) times the square of the radius times the depth. For this example, you would multiply 3.142 by the square of 30 by 30 to obtain the volume.