Admin Table of Contents
How do you cover an old footstool?
- Remove the unwanted fabric. Begin by ‘ripping down’ or stripping off the old fabric covering and trimmings.
- Prise out old staples. Take out all tacks and staples.
- Measure up new fabric.
- Staple fabric to frame.
- Add a decorative piping.
- Cover the bottom half.
- Secure the underside.
- Add and fix some trims.
How do you reupholster an antique footstool?
Reupholster a Very Old Footstool
- Step 1: Take Stock. This covering is just too threadbare to try to salvage.
- Step 2: Unhitch the Old Cover.
- Step 3: Clean and Sand.
- Step 4: Apply New Wood Stain.
- Step 5: Fresh Padding.
- Step 6: Staple Fabric.
- Step 7: Staple All Around.
- Step 8: Cut Off Excess Fabric.
How much fabric do I need to cover a footstool?
How Much Upholstery Fabric Do I Need to Cover a Footstool? Sizes of footstools can vary, however normally 2-3 metres of an upholstery fabric is enough to bring that old footstool back to life again.
How do you cover a leather footstool with fabric?
Place a line of straight pins along the side of the fabric in a straight line from the top to the floor. Make it close enough to the ottoman to be snug, but not overly tight. Repeat for the other three corners, making sure your fabric is centered and not pinned too tightly.
How do you measure a footstool for fabric?
Measure the width of the ottoman’s top with a fabric tape measure. Measure the length of the ottoman’s top with the tape measure. Add 2 inches to each measurement if you intend to staple or tack the fabric in place or 1/2 inch to each measurement if you intend to sew the fabric to account for seam allowances.
How do upholstery prices work?
Upholstery labor prices range from $40 to $100 per hour, not including fabric. Pros usually estimate a total that includes all the work, instead of an hourly rate. For the average chair or couch, you can expect to pay around $500 to $1,000 per piece in labor.
Are footstools antiques?
Footstools may not be as popular a furniture item anymore, but many are still collected as antiques from simpler times. Essentially, footstools are short, backless stools that were for resting ones feet when sitting on a higher chair, thus their name.
What is a footstool made of?
A footstool comprises of a top seat area and the legs of a stool. The top area has used a variety of materials over the years, including wood, metal, fabric, faux leather, or upholstery, but this variety existed even within the same eras.
How to identify antique stools and chairs?
So, a better way to identify the time period these antique stools are from is their feet. Chairs and stools from the 1600s had legs with feet designs like the ball, block, turnip, whorl (this was typically at the end of a cabriole leg) and toupie, and the popularity of some of these designs carried on into the 1800s as well.