Admin Table of Contents
Why does my freezer work but my fridge doesn t?
The most common cause for this condition is a problem with the defrost system. If the refrigerator freezer is cold but the refrigerator is warm, the evaporator fan motor might have failed. Every refrigerator has a set of coils called an evaporator.
Why is my Whirlpool freezer not freezing?
The most common cause for this condition is a problem with the defrost system. The defrost heater turns on several times throughout the day to melt away any frost that may have accumulated on the freezer evaporator coils. If the defrost heater does not have continuity, replace it.
What is the first thing to check when refrigerator stops working?
If Your Fridge Has Stopped and the Light is Off As obvious as this sounds, often a fridge shuts down completely because it’s simply getting no power. The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.
Most don’t automatically reset. If the appliance has a reset button, it should just need to be held in for 30 seconds to correct the fridge. Some refrigerators, including Maytag and Amana, need to have the lock button and the reset or auto buttons held at the same time to reset the fridge.
How do I reset my Whirlpool freezer compressor?
4 steps to reset a refrigerator compressor
- Unplug your refrigerator.
- Turn off the refrigerator and freezer from the control panel.
- Reset your freezer and fridge temperature settings.
- Wait for the refrigerator temperature to stabilize.
Is there a reset button on a Whirlpool refrigerator?
Whirlpool places its water filters either tucked into the grille at the base of the appliance or in the upper right corner of the interior of the fridge. Locate the water filter and lift the plastic filter door. Reset the status by pressing and holding the water filter button for at least 3 seconds until it turns blue.
Whirlpool refrigerator control panel reset is recommended if the refrigerator is beeping and not functioning properly. When the Whirlpool refrigerator reset button is not dealt with, it may cause more issues in the future.
How do I reset my Whirlpool refrigerator not cooling?
Reset power to the product: Power unit down by turning off the circuit breaker(s) or unpluging the product for 5 – 10 minutes. Power unit up by turning on the circuit breaker(s) or plugging the product back in.
Why is my Whirlpool refrigerator not working?
A common cause for a Whirlpool refrigerator not cooling properly is a defective door seal. A door seal that’s loose or damaged can cause your fridge to leak cold air, which will prevent it from staying at the optimum temperature. The door seal keeps hot air out and cold air in, so check it for any damage or gaps.
Why is my refrigerator working but my freezer is not?
A freezer that is attached to a function refrigerator may not work properly when the door doesn’t seal, there is a blockage in the drain lines or the cooling system is malfunctioning. Adjusting the temperature controls may also be necessary to fix the problem.
Why is my Whirlpool oven not working?
The most common reasons for ovens to not work correctly has to do with the cheapest part used when building the oven – the thermostat. The thermostat cycles the heat on and off to meet your desired temperature. This part often fails, giving you wrong temperature readings, if any temperature at all.
How do you troubleshoot a whirlpool refrigerator?
Troubleshooting a Whirlpool refrigerator begins with checking the power cord. Plug in the power cord, or try another port if the cord is plugged in well. Check if the refrigerator door fails to close completely or if it fails to open normally. Examine and set the temperature of the refrigerator accordingly.