Admin Table of Contents
Why are bullets cylindrical?
Answer: The magnus effect is absent if the spinning cylinder is moving linearly in the direction parallel to spin axis. That is why the bullets are made cylindrical instead of spherical. They do not deviate from the linear path.
Why are bullets that shape?
Sharp Bullets Aren’t Necessarily More Aerodynamic pointed bullets, many people point out that rifle bullets are pointier. This is why even the fastest and highest-piercing bullets don’t have needle-sharp tips. The rounded shape lets them avoid air resistance so they can travel without losing too much velocity.
Why are barrels cylindrical?
The circular shape withstands both internal and external pressures very well as the tension is distributed around the circumference, and it also makes it easy to move the (quite heavy when full) barrels from one place to another.
Can bullets be spherical?
After equating the value, we will get the number of spherical bullets that can be made out of a solid cube of lead. Now, let’s find the value of volume of spherical bullets of diameter 4cm and of radius 2cm. Now, putting the value of the radius of spherical bullets.
What is the cylindrical part of a bullet?
The cylindrical portion of the bullet is what engages the rifling of the barrel. The back of the bullet (aka “boattail”) geometrically is in the shape of the frustum of the cone Tapering the back of the bullet reduces drag, particularly at speeds less than supersonic.
What is the ogive shape of a bullet?
The ogive shape is formed from the arcs of two circles. The ogive may or may not be tangent at the point of intersection to the cylindrical portion of the bullet. When the circles are tangent to the cylinder portion, we call say this is a tangent ogive. When the circles are not tangent to the cylinder portion, we say we have a secant ogive.
What is the difference between round nose and flat nose bullets?
It’s exactly the same with bullets. Round or flat nose bullets are more cylindrical in shape, so much more of the length of the bullet will scrape against the rifling. On the other hand, an aerodynamic ballistic tip boat tail bullet only has a small section in the middle that contacts the rifling so it will operate with less pressure.
How does surface area affect a bullet’s rifling?
The more surface area contact, the more force is required to move the bullet through the rifling. If one bullet shape is harder to push through the bore, there’s going to be a higher pressure buildup behind it.