What is the mix ratio for a Yamaha Banshee?

What is the mix ratio for a Yamaha Banshee?

recommended is 32:1-50:1. i would run it at 32:1 and if it still smokes to much go to 40:1.

What oil do you put in a Yamaha Banshee?

AMSOIL synthetic ATV lubricants are the choice of riders everywhere. AMSOIL is the Official Oil of the GNCC series. You can trust them to protect your ATV. Also, check out our customer reviews on amsoil.com to make the best choice for your Yamaha Banshee 350.

What’s the best 2 stroke oil for a banshee?

This is why Maxima’s Castor 927 is probably the most popular oil that is used in the Banshee. Both Castor 927 and Benol have additives to help prevent build up and gumming and I was told by a top engine builder that if you ride them hard, which is how everyone rides a Banshee, build up and gum up isn’t such a problem.

What size fuel line does a Yamaha Banshee use?

Banshee/Blaster Choke Plunger For Pingle valves and most all carbs we recommend using this 1/4″ size.

How much horsepower does a Yamaha Banshee have?

The advertised power output of a stock Banshee is 34 hp/34.47 PS (25.35 kW), while its claimed maximum torque is 54 Nm (39.83 ft-lb/5.51 kgf-m). Fuel: Fuel tank capacity is 3.2 US gallons/12 liters with a 0.7-gallon/2.5-liter reserve. Use premium unleaded fuel for top performance.

What kind of oil do you put in a Yamaha Banshee?

The Yamaha Banshee uses premixed oil since it is a two-stroke. For those of you who are new to these, you mix oil with premium gas that lubricates the cylinders and crank, instead of putting oil in the crankcase like a four-stroke quad. I suggest using a good aftermarket oil.

What fuel to mix with Yamalube?

With Yamalube, I would stay at 32:1, but if you go with a better quality oil such as Klotz, Maxima, Amsoil, etc. then I would go 40:1 as they offer much better protection than Yamalube. 9 years later… Factory specs foe fuel to oil mixture is 24:1 yamalube r or equivalent oil. 91 octane or higher.

What kind of maintenance does a Yamaha Banshee need?

That covers the basics of maintenance that you will have to do to your Yamaha Banshee. It is mostly just cleaning that you should be doing to any other ATV. As with any other quad, you should also keep it washed to prevent rust and to prevent dirt from working its way into bearings.