Admin Table of Contents
- 1 What is SAE J2210?
- 2 Which SAE standards must be referred to on the label of approved HFC-134a refrigerant recycling machines?
- 3 What is SAE j2196?
- 4 What standard must the R-134a recycling equipment meet?
- 5 What certification do I need to buy R134a?
- 6 What size are R134a fittings?
- 7 What are SAE standards?
- 8 What is SAE specification?
- 9 What is SAE material?
What is SAE J2210?
The purpose of this SAE Standard is to establish the specific minimum equipment requirements for recycling HFC-134a (R-134a) that has been directly removed from, and is intended for reuse in, mobile air-conditioning (A/C) systems.
Which SAE standards must be referred to on the label of approved HFC-134a refrigerant recycling machines?
The purpose of this SAE Standard is to provide minimum performance and operating feature requirements for the recovery of HFC-134a (R-134a) refrigerant to be returned to a refrigerant reclamation facility that will process it to the appropriate AHRI 700 Standard or allow for on-site recycling of the recovered …
What is SAE j2196?
This SAE Standard covers reinforced rubber, reinforced thermoplastic, or otherwise constructed hose, or hose assemblies, intended for conducting liquid and gaseous refrigerants for service connections from mobile air conditioning systems to service equipment such as a manifold gauge set and vacuum pumps or for use …
What does SAE Standard J2788 apply to and what are the details of this standard?
The purpose of this SAE Standard is to establish the specific minimum equipment performance requirements for recovery and recycling of HFC-134a that has been directly removed from, and is intended for reuse in, mobile air-conditioning (A/C) systems.
What is the current standard for recovery only equipment is SAE?
The federal agency, according to information from the Automotive Aftermarket Industry Association (AAIA), recently issued a Direct Final Rule requiring that refrigerant recovery equipment used for vehicle air conditioner repair meet SAE standard J2810, replacing the current standard J1732.
What standard must the R-134a recycling equipment meet?
SAE J3030
(10) Equipment that recovers, recycles, and recharges both HFO-1234yf and R-134a from MVACs must meet the standards set forth in SAE J3030 (incorporated by reference, see § 82.31).
What certification do I need to buy R134a?
How Can I Get Certified for R-134a? In order to be able to handle these super gases you need to be section 609 certified with the Environmental Protection Agency. This section 609 comes straight from the Clean Air Act of 1990. Today there are more than one million people certified under this section 609.
What size are R134a fittings?
Fittings are 7/16″ Flare x 14MM Hose for Automotive R-134a.
What is J1989?
J1989: Recommended Service Procedure for the Containment of Cfc-12 (R-12) – SAE International.
Do Valeo Compressors come with oil?
Problems arise when there is too much oil (i.e. lack of lubrication) or not enough oil to sustain the life of the compressor. The compressors we receive from Valeo compressor group contain a specific amount and type of compressor oil.
What are SAE standards?
SAE Standards are the workhorse documents that harmonize processes, practices, and products throughout the transportation engineering industry and are vital to ensure safety, quality, and reliability..
What is SAE specification?
SAE is the Society of Automotive Engineers. An SAE grade (probably from an SAE standard or specification) is identifies motor oil properties that defines its weight and viscosity and other properties, like SAE 10W-30.
What is SAE material?
SAE-AISI 1035 steel is a carbon (non-alloy) steel formulated for primary forming into wrought products. 1035 is the designation in both the SAE and AISI systems for this material. G10350 is the UNS number.