Admin Table of Contents
What is jogging of a motor?
NEMA defines jogging as “the quickly repeated closure of a circuit to start a motor from rest for the purpose of accomplishing small movements of the driven machine.”
What is a jogging function?
Jogging is a form of trotting or running at a slow or leisurely pace. The main intention is to increase physical fitness with less stress on the body than from faster running but more than walking, or to maintain a steady speed for longer periods of time.
What is automatic sequence control?
From International Dictionary of Marine Aids to Navigation. 5-2-105. A method of control in which successive operations are carried out in a sequence either predetermined or resulting from the correct execution of each successive operation.
How can you reduce the amount of voltage applied to the motor during itching?
Inching, however, is accomplished by providing a reduced amount of power to the motor. Transformers can be used to reduce the amount of volt age applied to the motor during inching, or reactors or resistors can be connected in series with the motor to reduce the current supplied by the power line.
What are the basic motor control components?
Motor Control
- Manual Motor Starters. Manual motor starters are motor control components that are used for motor protection.
- Motor Circuit Breakers.
- Contactors.
- Mini Contactors.
- Thermal Overload Relays.
- Motor Control Accessories.
How many terminals does a DC motor have?
two terminals
A DC motor has two terminals: positive and negative. When the positive wire is connected to the positive terminal and the negative wire connected to the negative terminal, the motor rotates clockwise. When they are reversed, the motor rotates counter clockwise.
What is electrical sequence?
In a three-phase system, the order in which the voltages attain their maximum positive value is called Phase Sequence. There are three voltages or EMFs in the three-phase system with the same magnitude, but the frequency is displaced by an angle of 120 deg electrically.
What is sequential starting method?
Sequence control is the method by which starters are connected so that one cannot be started until the other is energized.
What is jogging inching?
Jogging refers to repeated starting and stopping of a motor in short bursts to perform a particular movement such as moving a crane to a particular location. Inching involves short thrusts of motion at reduced power. The motor is made to run at a reduced voltage.
What is the meaning of jogging in electrical?
The definition of jogging or inching as described by NEMA is “the quickly repeated closure of a circuit to start a motor from rest for the purpose of accomplishing small movements of the driven machine.” The term jogging actually means to start a motor with short jabs of power at full voltage.
What is the purpose of motor jogging?
Jogging is moving the motor in small increments. It is mostly used to align or position drive elements for connection or maintenance. If a machine that requires motor jogging for some reason is fitted with a VFD, the VFD may facilitate the jogging but it will still be needed. There is another operating mode called inching.
What is jogging operation in AC motor?
Jogging Operation in AC motor Can be operated by using a Simple Push Button, or a Control Relay, or a Selector Switch Repeated starts and/or jogs of induction motors generally reduce the life of the motor winding insulation. A much greater amount of heat is produced by each acceleration or jog than by the same motor under full load.
What happens when you plug in a DC motor?
For DC motors, plugging is achieved by reversing the polarity of the armature voltage. When this happens, the back EMF voltage no longer opposes the supply voltage. Instead, the back EMF and the supply voltage work in the same direction, opposing the motor’s rotation and causing it to come to a near-instant stop.