Guidelines

What factors determine your safe speed when going down a long steep downgrade?

What factors determine your safe speed when going down a long steep downgrade?

36. When going down a long, steep downgrade, what factors determine your selection of a safe speed?

  • Total weight of the vehicle and cargo.
  • Total weight of the vehicle, steepness of the grade, weather.
  • Length of the grade and steepness of the grade.

What factor determine your selection of a safe speed?

In establishing a safe operating speed, the operator must take into account visibility; traffic density; ability to maneuver the vessel (stopping distance and turning ability); background light at night; proximity of navigational hazards; draft of the vessel; limitations of radar equipment; and the state of wind, sea.

What is the proper braking technique when going down a long steep downgrade?

On a long or steep downgrade, brakes should only be used to supplement the braking effect of the engine. Apply the brakes just enough to feel a definite slowing down, then release them once you are about 5 mph below your target “safe” speed. Once your vehicle reaches its safe speed again, repeat this process.

What factors determine your selection?

Seven factors affecting the outcomes of your selection process

  • The recruitment campaign.
  • The geographic location of candidates.
  • The literacy skills of the candidates.
  • The number of candidates applying for a position.
  • The correct use of assessment.
  • Attractiveness of the position.
  • The selection process itself.

When going down a long steep downgrade you should always?

The driver should continually downshift instead of using the brakes. On long and/or steep downgrades, you should primarily use engine braking to control the speed of your vehicle. Use your brakes only as a supplement to this effect.

What is the reason to be in the proper gear before starting down a hill?

Why should you be in the proper gear before starting down a hill? So you only have to apply the brake just hard enough to feel a definite slowdown. So you don’t have to shift gears going downhill. So you can go through the gears on the way down.

Why should you be in proper gear before starting down a hill?

When going down a downgrade in a vehicle with an automatic transmission you should?

Use Lower Gears to Go Downhill If your vehicle has an automatic transmission, use “L” or “2.” However, if you do need to brake frequently, pull over if you start to smell the brakes burning.

What are some advantages to going right instead of left around an obstacle?

What are some advantages of going right instead of left around an obstacle? No one should be driving on the shoulder on the right. If an oncoming driver has drifted into your lane, a move to your right is best. If that driver realizes what has happened, the natural response will be to return to his or her own lane.

Which of the following answers is most correct about using brakes on a long and or steep downgrade?

Air Brakes

Question Answer
Which of the following answers is most correct about brake use on a long and steep downgrade? Use the braking effects of the engine, and when the vehicle speed reaches the “safe” speed, apply brakes firmly until vehicle speed is reduced to approximately 5 mph below “safe” speed

What factors determine a safe speed when going down a steep downgrade?

1. What factors determine your selection of a “safe” speed when going down a long, steep downgrade? Your most important consideration is to select a speed that is not too fast for the: Total weight of the vehicle and cargo. Length of the grade. Steepness of the grade.

What factors should be considered when choosing a speed on hills?

Your most important consideration is to select a speed that is not too fast for the: Total weight of the vehicle and cargo. Length of the grade. Steepness of the grade. Road conditions. Weather. 2. Why should you be in the proper gear before starting down a hill?

What is a safe speed in severe weather?

Severe Weather: Go to Shore or Ride it Out? What Is a Safe Speed? A safe speed is a speed less than the maximum at which the operator can take proper and effective action to avoid collision and stop within a distance appropriate to the prevailing circumstances and conditions.

What factors must be considered in establishing a safe operating speed?

In establishing a safe operating speed, the operator must take into account visibility; traffic density; ability to maneuver the vessel (stopping distance and turning ability); background light at night; proximity of navigational hazards; draft of the vessel; limitations of radar equipment; and the state of wind, sea, and current. Unit 4 of 6