What does e mean on welding rod?

What does e mean on welding rod?

The letter “E” indicates an electrode. For example, the number 70 in a E7018 electrode indicates that the electrode will produce a weld bead with a minimum tensile strength of 70,000 psi. The third digit represents the welding position(s) for which the electrode can be used.

What does the E stand for on an electrode?

The “E” indicates an arc welding electrode. The first two digits of a 4-digit number and the first three digits of a 5-digit number stand for tensile strength. For example, E6010 means 60,000 pounds per square inch (PSI) tensile strength and E10018 means 100,000 psi tensile strength.

What is a 6013 Rod Good For?

The 6013 finds its applications in vehicles, shipbuilding, and repair, sheet metal, the build-up of over-machined and worn mild steel surfaces and general light fabrication. The 6013 also facilitates a quiet arc that is readily maintained with minimal spatter loss.

What size is 6013 welding rod?

3.15 mm
6013 Welding Rod, Size: 3.15 mm Diameter.

What is the meaning of E 6011?

DESCRIPTION: Pinnacle Alloys E6011 is a cellulosic electrode with penetrating characteristics designed to handle coated steels.

What is the welding position of E 6011?

E6011 is a mild-steel, all position electrode designed primarily for use on AC power sources. It produces a strong arc force for deep penetration and a fine spray transfer that enhances operator appeal. Fast freezing or rapid solidification of the metal allows welding in the vertical and overhead position.

What does E in E7018 mean?

The 7018 Welding Rod The “E” in E7018 electrode indicates a tool used for an arc-welding process. The 70 means it makes welds that are very strong (70,000 psi). The 18 means two things: The “1” means the electrode can be used in any position, and the “18” means low hydrogen and usually DC current.

What does the 13 in E6013 stand for?

E6013 = High titania potassium flux. AC, DCEP, or DCEN for flat, vertical, overhead, and horizontal positions. E7018 = low-hydrogen potassium, iron powder flux.

Is a 6013 Rod AC or DC?

6013 electrodes may be used in any position with AC or DC (straight or reverse polarity). recommended. Operate by holding a short arc or using the drag technique.

What is the smallest welding rod?

Small diameter rods, for example, 1/16″ (1.6mm) and 5/64″ (2mm), are more challenging to weld with than common size rods. That’s because you use these diameters for workpieces thinner than 1/8″ (3.2mm), which is the smallest recommended size to weld with the stick welding process.

What is the best welding rod for pipe?

7018 Welding Rod 7018 is the conditional best welding rod for welding pipe fences. It provides unparalleled smoothness and polish on the weld. The overall weld finishing of 7018 is much better compared to 6010 and 6011 while also having higher tensile strength.

What is a 6013 electrode?

Why it is known as the 6013 electrode. There are many different types of electrodes used in the shielded metal arc welding, (SMAW) process. Arc welding electrodes are identified using the A.W.S, (American Welding Society) numbering system and are made in sizes from 1/16 to 5/16 .

What is a 6013 welding rod used for?

Uses and Applications of 6013 Rod. The E6013 is designed for medium to light penetration welding. It is used for welding carbon steel and is also used for welding any type of polarity. As mentioned above, it is very popular for beginners because it readily provides a stable arc that is fit for welding poor fitting joints.

What is E6010 and E6013 used for?

E6010 This electrode is used for all position welding using DCRP. It produces a deep penetrating weld and works well on dirty,rusted, or painted metals. E6011 This electrode has the same characteristics of the E6010, but can be used with AC and DC currents. E6013 This electrode can be used with AC and DC currents.

What is the difference between E6013 [e4313] and E6012 electrodes?

E6013 [E4313] electrodes, although very similar to the E6012 [E4312] electrodes, have distinct differences. Their flux covering makes slag removal easier and gives a smoother arc transfer than E6012 [E4312] electrodes.