What does a reglet do?

What does a reglet do?

A reglet is often used on a roof at the joint between the parapet wall and the flat surface of the roof. The primary function of the reglet is to keep moisture out of the wall by sealing or covering gaps between two materials. In a masonry wall, a reglet typically includes only a single piece of metal flashing.

What is reglet flashing used for?

Reglet flashing is installed between a wall (or the back side of a parapet wall) and a roof. This flashing is used with counter flashings to avoid leaks in one of the most crucial areas of a roof which is a ninety degree edge.

What is counter flashing on a roof?

Counter-flashing is designed to prevent moisture from entering behind the vertical flange of headwall or sidewall flashing. Sometimes, the exterior wall-covering material serves as the counter-flashing, and sometimes a separate counter-flashing might be installed.

Where does counter flashing go on a roof?

Properly installed, counter-flashing sections are inserted into the mortar joints, and then the joint is sealed with an appropriate sealant. Counter-flashing can also be inserted into a groove cut into the brick, and then sealed. Sealant here has been poorly applied and has left gaps that moisture can enter.

Should dormers have flashing?

All roof penetrations need to be properly flashed to prevent water damage. This is especially important with dormers because they expose a large wall area to the weather and create many linear feet of vulnerable roof-wall intersections.

What is a chimney Reglet?

A reglet is found on the exterior of a building along a masonry wall, chimney or parapet that meets the roof. It is a groove cut within a mortar joint that receives counter-flashing meant to cover surface flashing used to deflect water infiltration.

Have been neglected meaning?

(Entry 1 of 2) transitive verb. 1 : to give little attention or respect to : disregard The building has been neglected for years. 2 : to leave undone or unattended to especially through carelessness The prison guard neglected his duty.

When should counter flashing be installed?

Counter flashing is required at any point where a vertical masonry wall meets any type of roofing surface. This scenario applies to both chimneys and exterior walls on split level and other similarly designed homes. Counter flashing should also be used when roofing meets a vinyl exterior wall surface.

What is the purpose of a reglet?

A reglet is an important aspect of a properly installed flashing component. The introduction of a leg of the flashing into the adjacent wall secures the flashing from movement as well as eliminates the possibility of the flashing drawing away from the surface of the wall. In many renovations, the cutting in…

What is a reglet made of?

Reglets are primarily made from mill aluminum or pre-coat Kynar 500® aluminum sheet. The two piece reglet and flashing details are usually fabricated with an.050” (1.25 mm) reglet head and an.032” (0.80 mm) flashing.

What is a reglet on a building?

Jump to navigation Jump to search. A reglet is found on the exterior of a building along a masonry wall, chimney or parapet that meets the roof. It is a groove cut within a mortar joint that receives counter-flashing meant to cover surface flashing used to deflect water infiltration.

What is a reglet in flashing?

A groove or notch that is usually formed or cut into another material, to accept the edge of a piece of flashing. A reglet is an important aspect of a properly installed flashing component. The introduction of a leg of the flashing into the adjacent wall secures the flashing from movement as well as eliminates the possibility…