How much oil does a 2000 Oldsmobile Intrigue?

How much oil does a 2000 Oldsmobile Intrigue?

Engine Oil SAE 5W-30 is preferred. Capacity: 6 quarts. (with filter)After refill check oil level.

What are the steps to changing engine oil?

Follow these steps to change your own oil:

  1. Step 1: Jack It Up, Open It Up.
  2. Step 2: Unplug It, Drain It.
  3. Step 3: Off With the Old Filter.
  4. Step 4: Drain Plug in, Filter On.
  5. Step 5: Fill It Back Up with Oil.
  6. Step 6: Check the Oil Level, Check for Leaks.

What kind of oil does a Oldsmobile Intrigue take?

Engine Oil

Viscosity: 10W-30 (Above -18) SAE 10W-30 is preferred. 5W-30 (Below 16)
Capacity: 4.5 quarts. (with filter)After refill check oil level.
Torque: 30 ft/lbs (Oil Drain Plug)

How do you reset the change oil light on a 2000 Oldsmobile Intrigue?

Oldsmobile Intrigue Oil Light Reset Procedure:

  1. Turn ignition switch to ON position with engine off.
  2. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key.
  3. Change Oil lamp will flash for 2-10 seconds while it resets.
  4. Once it stops flashing, the maintenance light reset is complete.

Do I need to jack up my car for an oil change?

Changing your oil regularly is the single best thing you can do to prolong the life of your car’s engine. Most of the job is easy, but you’ll probably have to raise your car to get at the drain plug. You’ll need a sturdy set of car ramps for your car or a floor jack and safety stands designed for your car’s weight.

Should I warm up my car before changing oil?

Hot oil may flow freely, but it will also induce serious burns if you don’t let it cool down before changing it. The oil will warm up to about 100 degrees, which is not hot enough to burn you, but warm enough that it will flow easily. If the vehicle has been driven, let it sit for 20-30 minutes before draining the oil.

How do you reset the oil light on a Oldsmobile Intrigue?

Turn the ignition to on (not running), press and release the accelerator pedal 3 times in 5 seconds, Change oil soon light will flash twice if the light has reset.

What is safer ramps or jack stands?

Ramps are more affordable, safer and easy to use. They are suitable for changing oil and better for beginners, while jacks are for more advanced technicians. The jack equipment helps with more intricate maintenance, like working on brakes, exhaust work, or rotating tires.

How long should I let my car sit after changing the oil?

The oil will warm up to about 100 degrees, which is not hot enough to burn you, but warm enough that it will flow easily. If the vehicle has been driven, let it sit for 20-30 minutes before draining the oil.

Do you fill the oil filter with oil?

An age-old question is whether or not you should pre-fill your new oil filter before installing it in your vehicle. Instead of pre-filling the filter, we recommend first applying a little motor oil to the gasket and then replacing the filter. The motor oil will prevent the gasket from sticking or causing an oil leak.

Can I change engine oil myself?

Materials Required. Changing the oil in your car is something that any DIYer can do. Although changing the oil might appear rather “duh,” there are still a lot of folks doing it wrong, making it an ugly chore. An oil change is the most important task you can do to make your engine last.