How much fuel does an excavator use per hour?

How much fuel does an excavator use per hour?

Consumption Table

Model Consumption: Gallons Consumption: Liters
EC300E 5 gallons per hour or less 18.9 liters per hour or less
EC350E 8 gallons per hour or less 26.5 liters per hour or less
ECR355E 5.5 gallons per hour or less 20.8 liters per hour or less
EC380E 9 gallons per hour or less 34.1 liters per hour or less

How much fuel does a dozer use per hour?

A Caterpillar D6 dozer is said to burn between 3.5 gal. (13.3 L) and 6.5 gal. (24.7 L) of diesel an hour when operating under moderate conditions. Fuel consumption of larger dozers like the D11 can be five times that much.

How much fuel does a CAT excavator use?

Service Refill Capacities

Fuel Tank Capacity 86.6 gal (US) 345 l
Engine Oil 4 gal (US) 15 l
Swing Drive – Each 3.2 gal (US) 12 l
Final Drive – Each 1.3 gal (US) 5 l
Hydraulic System – Including Tank 61.8 gal (US) 234 l

How much fuel does a CAT 325 use?

Service Refill Capacities

Fuel Tank Capacity 82.7 gal (US) 313 l
Engine Oil 4 gal (US) 15 l
Swing Drive 3.2 gal (US) 12 l
Final Drive – Each 1.1 gal (US) 4 l
Hydraulic System – Including Tank 60.8 gal (US) 230 l

How much fuel does a D3 Dozer use per hour?

The fuel tank on the D3 dozer holds 30.1 gallons of diesel fuel. The transmission features three forward gears, and is capable of moving forward at a rate of seven miles per hour. There is only one reverse gear that can move the dozer at a speed of 3.2 miles per hour.

How much does a CAT 320 excavator cost?

Therefore this machine is a useful excavator to have around for most medium-sized construction jobs. Other models in this range weigh from 65,000 to 80,000lbs and have an engine power rating of 204 to 268hp. A new CAT 320 costs between $230,000 to $270,000.

How much fuel does a wheel loader use per hour?

A medium wheel loader, says Caterpillar, typically consumes less than a gallon per hour when idling. On the other hand, a 369-horsepower 980K working steadily (no idle time) in a difficult application (such as the load-and-carry cited earlier) might burn more than 12 gallons per hour.

How much does a 312 CAT excavator weigh?

33080 lbs
Weights

Maximum Operating Weight 33080 lbs (15,005 kg)
Minimum Operating Weight 29770 lbs (13,504 kg)
Operating Weight 33080 lbs (15,005 kg)

How much can a cat 325 lift?

With an 8 percent increase in max lifting capacity over the 321D, the 325F L can lift 27,000 pounds at 15 feet over the front at ground level. Coming in at a weight of 57,115 pounds this machine features a 45,591-pound drawbar pull and swing speed of 11.2 rpm.

What does a CAT 325 weight?

The Caterpillar 325 crawler excavator is a compact-radius model with an operating weight of 49,604 pounds with 24-inch grouser shoes (63,493 pounds with 31-inch shoes).

How much does a CAT D3 weight?

Weights

Operating Weight 20639.68 lb 9362 kg
Operating Weight – LGP 21369 lb 9693 kg
Operating Weight – LGP, 762 mm/30 in 21810 lb 9893 kg
Note (2) For machine with ripper, add 554 kg (1,222 lb). For machine with ripper, add 554 kg (1,222 lb).

How many horsepower is a D3 Dozer?

62 hp
Engine

Displacement 317.4 cu in (0 m)
Engine Model 3204
Gross Power 62 hp (46 kw)

Why choose the next generation CAT 345 GC excavator?

The new Next Generation Cat ® 345 GC excavator is designed to deliver a balance of performance, reliability, and low-cost operation. The excavator can increase fuel efficiency (cubic yards/tons per unit of fuel) up to 25 percent and lower operating costs up to 30 percent compared to the 349D2.

Location: Pacific Northwest. It all depends on the excavator. A cat 330 will use between 10 and 14 gallons per hour. And an Hitachi 350 or Komatsu 300 will use between 5 and 8 gallons per hour.

How much water does your cat 330 use per hour?

A cat 330 will use between 10 and 14 gallons per hour. And an Hitachi 350 or Komatsu 300 will use between 5 and 8 gallons per hour. My PC400-LC3 uses about 50 gallons per 8 hour day semi hard digging.

What kind of start does a 345 GC have?

The 345 GC uses a keyless push-button engine start for added security, requiring Operator ID codes that can be entered manually via an optional Bluetooth key fob or smart phone app. Convenience features include Bluetooth ® integrated radio, USB ports for charging and phone connectivity, 12-volt DC outlets, an AUX port, and ample storage.