Admin Table of Contents
How does a drainage interceptor work?
Interceptors work by trapping rainwater runoff from surfaces where oil is present – by trapping this runoff, they ensure that oil does not contaminate soil and water.
How does an interceptor trap work?
Their main purpose was to prevent odours and gases from the main sewer venting into properties, therefore preventing airborne infection. This is done by the water held in the trap which creates an airtight seal, but allows solids and liquids to flow through.
What is drain interceptor trap?
A Buchan trap (alternative names: Bristol interceptor, interceptor trap and disconnecting trap) is a device made from fireclay located in a domestic sewer pipe to prevent odours entering the pipe from the public sewer and thus the property served by the drain. Waste flows from the house through a U-bend in the trap.
What does a plumbing interceptor do?
According to Universal Plumbing Code, “a grease trap/grease interceptor is a plumbing device that is installed in a sanitary drainage system to ‘trap’ or ‘intercept’ non-petroleum FOG from a wastewater discharge.” Wastewater flows from the sink of drain into a tank.
What are the two types of interceptors?
There are 2 main types of Petrol/Oil Interceptor; Full Retention Interceptors, which are designed to treat the full flow delivered by a drainage system up to 50 mm/hr. Bypass Interceptors which, are designed to treat flows of up to 5 mm/hr. This covers 99% of rainfall.
What is interceptor pipe?
An interceptor sewer is a major sewer line that receives flows from trunk sewer lines, and sometimes, stormwater drainage systems. Some interceptor sewer lines can be over eight feet in diameter and convey millions of gallons of wastewater per day. Interceptor sewers are also known as interceptors.
What is the use of gully trap?
A gully trap is provided outside the building before connecting to external sewerage line. It also collects waste water from the kitchen sink, wash basins, baths and wash area. Gully Trap is provided to prevent the foul gases entering in to the building by providing water seal.
Are P traps required?
Plumbing codes require a P-trap be installed anywhere there is an open drain line that expels wastewater into a drain waste-vent system. The P-trap traps solids that can clog the drain or sewer line.
What is interceptor waste?
Interceptors (or separators, as they’re often known), come in all shapes and sizes as they’re used to separate other waste streams, such as marble/granite cutting and grease, as well as fats and oils produced by industrial canteens and food processing facilities.
What is a water interceptor?
An interceptor drain, also known as a curtain drain, is a drainage system that is installed to collect, channel and remove surface and subsurface water within permeable soil as it flows across an impermeable soil layer.
What is gully trap in plumbing?
Gully traps are built external to the building to carry wastewater release from sinks, washbasin, restroom, and so on, and are associated with the most nearby building drain or sewer so that foul gases from the sewer don’t go to the house. These are profound seal traps.
What is the difference between a gully and a drain?
As nouns the difference between drain and gully is that drain is a conduit allowing liquid to flow out of an otherwise contained volume while gully is a trench, ravine or narrow channel which was worn by water flow, especially on a hillside or gully can be (scotland|northern uk) a large knife.
When did drain interceptor traps come into use?
Drain interceptor traps “My Dad told me about them!”: Drain interceptor traps Introduced in Victorian times, drain interceptor traps were originally installed to stop the smells from sewers venting into properties.
How do grease traps or interceptors work?
Learn how and why grease traps or interceptors work to keep your plumbing functioning properly. In the most basic terms, a grease trap works by slowing down the flow of warm/hot greasy water and allowing it to cool. As the water cools, the grease and oil in the water separate out and float to the top of the trap.
What are the different types of interceptor traps?
There are various different well-known types of Interceptor Trap for example: Winser trap, Kenon trap, Bristol trap, Buchan trap and Reverse Interceptor trap. They are all made from vitreous clay and are still available today. However, as is everything these days, they do not make them like they used to.
Should I remove my interceptor traps?
You might still come across an interceptor trap when working on older properties, if it still has the cap intact you’ve found a gem of an antique! If the traps are causing problems it’s often easier to remove and replace them with a straight section of pipe.