on Q&A

How do you use a code search on a RCA universal remote?

How do you use a code search on a RCA universal remote?

Using Automatic Code Search on my RCA Remote

  1. Manually turn on the component you want to control.
  2. Press and hold the CODE SEARCH key until the remote’s indicator light comes on.
  3. Press the component key you want to program.
  4. Point the remote directly at the front panel of the component you want to control.

Can a universal remote work on DVD player?

Can a universal remote control be programmed to operate a Blu-ray Disc player? The DVD button on recently-manufactured Sony® universal remote controls can be programmed to control Blu-ray Disc® players. It may be possible to use this same button on non-Sony remote controls as well.

How do you program a universal remote to a GPX DVD player?

GPX DVD Player 4 Digit Remote Control Programming Instructions

  1. Enter Setup Mode. Press and hold down the SETUP button on the remote until the red light on the remote turns on.
  2. Press the device type button.
  3. Enter the device code.
  4. Tests the results.
  5. Repeat this process for your other devices.

How do you program a RCA rcr312wr universal remote?

Programming the RCA RCR312WR Remote Control Your universal remote can operate a variety of brands of components. In order for your universal remote to control your components, you need to program the remote with the codes that match the components (See Code Lists enclosed). These codes enable the remote to communicate with your components.

How do you program a VCR remote to a DVD player?

VCR•DVD for VCRs or DVD players. GO BACK key. 1. Manually turn on the device you want to control. 3. Press and hold the device key you want to program. While time. 4. Wait until the ON•OFF key comes on and stays on. Then release both keys. 5. Point the remote directly at the want to control.

How do I program the remote to the remote control?

Press and release the appropriate brand code key, using the number keys on the keypad. The illuminated ON•OFF key blinks once. Tip: Throughout the programming of each key, be sure to keep the remote pointed at the IR sensor of the component you are currently programming the remote to control.

How do I program My Philips TV remote to my TV?

1. Manually turn on the device you want to control. 3. Press and hold the device key you want to program. While you’re holding down the device key, use your other hand to press and hold the remote’s ON†OFF key at the same time. 4. Wait until the ON†OFF key comes on and stays on. Then release both keys.