How do you test a windshield washer pump fuse?

How do you test a windshield washer pump fuse?

Part 2 of 2: Inspecting the windshield washer pump fuse 1 Locate the washer pump fuse. Using your owner’s manual, locate the fuse for the washer pump. 2 Test the fuse with the test light. Attach the clip of the text light to any bare metal surface on the car. 3 Replace the defective fuse as needed. 4 Test the washer pump itself.

What should I do if my windshield washer pump is not working?

If there is fluid in the reservoir and the nozzles are still unable to spray it onto the windshield, try placing your hand on the reservoir while a friend operates the washer nozzles. Feel and listen for the washer pump to operate. Step 5: Inspect the vehicle. If you can feel or hear the pump working, take a look around the vehicle.

How do you test a whirlpool washing machine pump?

Locate the washer pump at the bottom of the reservoir. Attach the test light clip again, have a friend activate the washer nozzles, and proceed to probe the back of the connector on the washer pump. When the nozzles are activated, the test light should indicate power on one of the two wires.

Is it common for windshield washer nozzles to get clogged?

However, it is also common for the nozzles to get clogged and occasionally a vehicle may even have a failed washer pump. Here are ways to help clean out a vehicle’s clogged windshield washer nozzle and tubes, as well as diagnose a faulty windshield washer pump.

Where is the fuse that controls the washer pump?

Locate the fuse that controls the washer pump. Find your vehicle’s fuse box underneath the hood near the front fender. Read the fuse diagram on the cover to locate the fuse that controls the washer pump. Take the cover off of the fuse box and find the corresponding fuse.

How do you test a washer pump on a Honda Accord?

Step 1: Locate the washer pump fuse. Using your owner’s manual, locate the fuse for the washer pump. Step 2: Test the fuse with the test light. Attach the clip of the text light to any bare metal surface on the car. This will ground the test light.

How do you fix a washer fluid pump that won’t work?

Move the nozzle in the direction you want, but do not force it or your wire or needle could break and get lodged in the nozzle. Check your washer pump’s power if the fluid is still not appearing when activated. Turn off the car’s power. Look for the pump on or in your washer fluid reservoir.