Guidelines

How do you replace the power antenna mast on a Toyota 4Runner?

How do you replace the power antenna mast on a Toyota 4Runner?

Starts here12:09Toyota 4runner Power Antenna Replacement – YouTubeYouTubeStart of suggested clipEnd of suggested clip59 second suggested clipOr you can just let it fall out let’s. See see there that’s exactly what happened on the trail. AndMoreOr you can just let it fall out let’s. See see there that’s exactly what happened on the trail. And you can pull it all the way out like that. And you can see it’s still running but that’s. Okay.

How do you turn off the power antenna on a Toyota 4Runner?

Starts here0:48How to Disable Toyota 4Runner Antenna – YouTubeYouTubeStart of suggested clipEnd of suggested clip34 second suggested clipRight there and then your antenna will be disabled. From the motor. Yes it actually will still workMoreRight there and then your antenna will be disabled. From the motor. Yes it actually will still work to give you a frequency to listen to the radio. So a quick and easy fix.

How do you replace the antenna on a 1998 Toyota 4Runner?

Starts here0:00Antenna Mast Replacement 1998 4Runner – YouTubeYouTube

How do you fix a broken antenna?

Starts here20:52How To Repair A Broken Car Antenna -EricTheCarGuy – YouTubeYouTube

How do you replace an automatic antenna?

  1. Step 1: Disconnect the negative cable of the battery.
  2. Step 2: Gain access to the antenna motor.
  3. Step 3: Remove the top mounting nut.
  4. Step 4: Remove rubber grommet.
  5. Step 5: Unscrew the motor from the car’s frame.
  6. Step 6: Unplug the antenna motor.
  7. Step 1: Plug in your new antenna motor.

How do I turn off the power antenna?

Just flip the switch off to keep the antenna at that spot. If you want it to stay down, turn off the radio (or the ignition), let the antenna go down, then flip the switch off. If you want it to stay at 12″ extension, flip the switch off while the antenna is at that height.

How do you fix a car antenna cable?

Starts here5:42Car Antenna Cable Repair – YouTubeYouTube

How do you replace an old car antenna?

Starts here2:31Replace Car Antenna – YouTubeYouTube

How do you remove a power antenna from a Toyota Corolla?

Unscrew the bezel (Photo 1) and remove the antenna retaining bolts. If your power antenna is mounted inside the front fender, remove the wheel-well liner by pulling out the plastic rivets and push-in retainers. Next disconnect the power and coaxial cable connectors and remove the entire unit from the vehicle (Photo 2).

How to fix a power radio antenna that won’t go up?

Install the cover and tighten the screws. If your power radio antenna won’t go up and down anymore, the problem is either a burned-out motor or the geared cable inside the mast. Both are easy DIY fixes. You can do the entire repair in about two hours. The parts run about $25 for a new cable/mast, plus the cost of the special wrench.

How do I replace the mast on my antenna?

Remove the cover screws from the antenna. Then lift the cover and note the location of the gears, cable spool, washers and idler roller before you remove them. Next, remove old mast (Photo 1).

How do you remove the antenna from a Ford Fender?

You need only one special tool, an antenna wrench. Tilt the bottom of the antenna away from the fender and pull the unit down and out. That will loosen the rubber gasket and break the unit free. Use the special wrench to remove the bezel that holds the antenna in place.

https://www.youtube.com/watch?v=3IDl3uiSEVQ