Admin Table of Contents
How do you program a factory GM remote?
Simultaneously press and hold the lock button and the unlock button on the keyless remote for fifteen seconds. The doors will lock and unlock as you are holding down both buttons to confirm the programming of that transmitter. Do not wait to do this step.
How do I reprogram my Cadillac remote?
How To Reprogram A Fob
- Close all of the doors.
- Insert the ignition key into the ignition.
- Press and hold the DOOR unlock button.
- While holding the DOOR lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF.
- Release the DOOR unlock button.
- The doors will lock and unlock to confirm the program mode.
How do you program a Pontiac remote?
Programming mode activated, proceed as follows: Press and hold LOCK and UNLOCK remote buttons on first remote transmitter simultaneously for 15 seconds. Wait for acoustic signal (indicates correct programming). Repeat above procedure to program remaining remote transmitters.
How do I program my GM key fob with remote start?
Hold down the unlock button on your driver’s door while pressing unlock on your fob. Hold the buttons, insert your key into the car’s ignition, and twist it to the “On” position. Twist the key to the “Off” position. Repeat this process twice (on-off – on-off).
How do I program a new Cadillac key?
How to Program Cadillac Keys
- Locate a qualified locksmith or authorized dealer to have a new key cut.
- Place the new key into the ignition.
- Turn the key back to the “On” position and wait 10 minutes and thirty seconds.
- Place the working, programmed key into the ignition.
How do I program my xt5 key fob?
Enter Programming Mode INSERT the CUT emergency key of the NEW smart key fob into the key lock cylinder AND TURN the key counterclockwise to the UNLOCK position 5 times within 10 seconds. The Driver Information Console (DIC) will display “READY FOR REMOTE #3, 4, or 5.”
Do you need a programmed remote for STS?
STS owners in the United States may conduct the procedure with or without a programmed remote, but those in Canada must have two programmed remotes or otherwise proceed to a dealership for programming. Turn off your vehicle and make sure you have all remotes with you, including the programmed remote and all new remotes.
What kind of key do I need for my Cadillac STS?
A word of caution: The type of key you need depends on the year and model of your Cadillac STS. Therefore, the options for getting a new key made and programmed depend on whether you need a remote, an intelligent fob, push to start button, a transponder, or a regular key.
What are the different types of keys for the STS model?
Cadillac STS model was introduced in 2004. This model has four versions and two types of keys. Remote key fob: 2008 to 2013. Transponder chip key: 2004 to 2011. Please keep in mind that while some keys or key fobs may look the same, they have different capabilities/frequencies/keyways.
How do you program a Ford remote key fob?
Put your vehicle key into the driver’s-side door lock and rotate the key to the “Unlock” position five times in five seconds. Look inside your vehicle at the Driver Information Center (DIC). You will see a display indicating entry into FOB mode, reading “Ready for FOB 2, 3 or 4”. You can only program up to four remotes.