Admin Table of Contents
How do you clean AquaPure cells?
Add one pint of muriatic acid to two quarts of water in a bucket. Pour the solution into the cell so it begins to foam. Leave the solution in the cell until the foaming has stopped or until the solution has been in the cell for more than 30 minutes. Wash the cell well with water.
What does cell reversing mean on AquaPure?
AquaPure automatically cleans the Cell electrodes once every 3 hours by reversing polarity. This does not interrupt the production of Chlorine.
How do I reset my Jandy AquaLink?
How do I Reset a Jandy AquaLink System?
- Press the “Menu” button.
- Scroll to and highlight “System Setup” using the arrow keys. Press “Enter.”
- Scroll to highlight “Clear Memory,” then press “Enter.” You have now reset your AquaLink system.
How long does a Jandy salt cell last?
Generally, a salt cell lasts for about 10,000 hours, which is usually around five years for most home pool owners. If your cell is close to or exceeds the 10,000-hour mark, and you notice any of the above signs, it could very well need replacement.
How long does a Jandy salt cell reverse?
3 hours
The system automatically cleans the cell’s electrode plates once every 3 hours by reversing the polarity of the electrical current. Whether the system is in forward or reverse, it is still producting chlorine. The flow portion of the flow/temp/salinity sensor detects if there is adequate water flow through the cell.
What is cell reversing?
The percentage setting will control how much the cell runs during the cycle. For example, at 50%, the box will say “Cell On” for 1.5 hours then “Cell Resting” for 1.5 hours. Then, there is a two minute off time, then the box will say Cell Reversing for 1.5 hours, then Cell Resting for 1.5 hours etc.
How do I reset my Jandy salt?
Each time a flow sensor is unplugged and plugged back in again the computer inside the unit must be reset by turning the power ‘off’ and then ‘on’.
How do I reset my Jandy pool lights?
To synchronize multiple lights to the same color mode, you will need to reset to the beginning of the color mode sequence. With the lights ON, turn them OFF for five (5) seconds, then turn ON again. All of the lights will reset to the Alpine White color mode.
What does 6700 Rev C mean?
If the “6700 REV C” code DOES appear, then the problem is at least in either the POWER CENTER or WIRING between the power center or remote, but it is possible that the original remote failed, too – we have seen the Power Center and Remote fail simultaneously.