How do I fix error code P0010?

How do I fix error code P0010?

Check freeze frame data relating to the ECM to help pinpoint the exact issue. Do a visual inspection of the bank 1 variable valve timing (VVT) control solenoid valve. Make sure to repair any frayed or faulty wiring or connectors. Once you have done this, clear the code and rescan to see if it is still present.

What does intake a camshaft position Timing Over Advanced Bank 1?

The camshaft is too advanced when the ECM has commanded the camshaft to retard to a lower timing level. The oil control solenoid to the bank 1 camshaft may be stuck or have clogged passages. The oil is too thick causing the passages to become clogged due to lack of oil flow to and from the camshaft phasers.

What does a camshaft position actuator circuit open bank 1 mean?

P0010
Code P0010 stands for “A” Camshaft Position Actuator Circuit (Bank 1). The code indicates that your car’s primary computer, which is also referred to as the powertrain control module (PCM), perceives a problem with one of the engine’s VVT solenoids. That means it turns the solenoid on and off really fast.

What can cause a P0011 code?

What Is The Cause Of Code P0011?

• Engine oil is dirty.
• Engine oil is too low.
• Engine oil is incorrect viscosity.
• Camshaft variable valve timing control solenoid failure.
• Camshaft phaser is seized in the advanced position.
• Continuous oil flow to Variable Camshaft Timing chamber.

What could cause a P0011 code?

The camshaft timing is off. The valve control solenoid is stuck open. The valve control solenoid system has faulty or damaged wiring. The oil is too viscous and flow to and from the camshaft’s phasers is restrictive.

What causes P0011 code?

But the main cause of the P0011 code is dirty or sludgy engine oil. If the oil is too thick or dirty, the oil passages in the camshaft phasers might get clogged or stuck, hence resulting in a constantly advanced timing in the bank 1 camshaft.

How much does it cost to fix P0011?

If the engine is relatively new or has low-mileage, the cost of fixing the P0011 code will cost no more than a basic oil change (around $30 to $50). In most cases, the P0011 OBD2 Trouble Code is caused by dirty oil.

Is code P0011 serious?

How Serious Is Code P0011? – Severe. This trouble code severely impacts the drivability of your vehicle. Continuing to drive the vehicle in this condition can cause severe damage to multiple internal engine components.

What is the p0011 camshaft position on a Chevy Malibu?

P0011: Camshaft Position “A” – Timing Over Advanced -or- System Performance (Bank 1) P0011 is a generic OBDII code. This means that it has the same definition regardless of the make or model of the vehicle. It has the same definition for the Chevy Malibu as it does on any other vehicle.

What are the symptoms of p0010 code on a Chevy Malibu?

Here are some of the typical symptoms of P0010 in the Chevy Malibu: Poor Idle Quality – If the camshaft actuator fails while giving the engine aggressive valve timing, it’ll idle roughly.

What is the VVT code on a Chevy Malibu?

The list of VVT vehicles is growing, and the Chevy Malibu can have VVT, and is prone to developing this code. P0010: “A” Camshaft Position Actuator Circuit Bank 1 P0010 is a generic OBDII code. This means that it has the same definition regardless of the make or model of the vehicle.

What does p0010 stand for?

P0010 is a generic OBDII code. This means that it has the same definition regardless of the make or model of the vehicle. It has the same definition for the Chevy Malibu as it does the Ford Taurus.