How do I adjust my TaylorMade R9 460 Driver?

How do I adjust my TaylorMade R9 460 Driver?

Remove the weights from the toe, heel and back of the driver head using the same R9 torque wrench. Insert the 16g weight into the back cavity and the two 1 g weights into the toe and heel cavities. Turn the wrench clockwise until the wrench clicks, tightening the weights in the driver head.

What year was the TaylorMade R9 made?

2009
TaylorMade’s newest club for the 2009 season is the TaylorMade R9 Driver. This driver truly is a new revolution in the golf driver category. The R9 utilizes TaylorMade’s legendary Movable Weight Technology (MWT) that was first introduced with their r7 metalwood product line.

What setting should my driver be on?

Woody says that getting the loft setting on your driver is the most important. Modern drivers allow golfers to move the loft around by several degrees now. Increasing or decreasing loft can change how far you hit the ball and the accuracy of your drives considerably.

Is the TaylorMade R9 a good driver?

The R9 is an excellent driver but it might not be the home run hit that golfers have come to expect from them. The pluses are that the appearance, adjustability, workability and sheer technology are as good as you’ll find in any club – they are genuinely excellent.

How old are TaylorMade r9 irons?

TaylorMade R9 Irons – Product Details

Is TaylorMade R9 driver forgiving?

Better players will enjoy the workability that the R9 offers while those less confident off the tee will certainly be impressed by the distance, consistency and forgiveness that this excellent club delivers.

Is TaylorMade R9 forgiving?

The R9 are great irons for those looking for forgiveness without sacrificing performance. The amount of technology packed in ensures that any swing is flattered.

How do you adjust Taylormade driver loft?

Adjust the loft by loosening the screw in the heel with the wrench, rotating the club head to the desired position, and tightening the screw. The specially designed wrench will deliver only the amount of torque needed to securely tighten the screw necessary to adjust the Loft Sleeve.

Are TaylorMade R9 irons good?

The Taylormade R9 Irons are a very high performing set of irons. They also feature TaylorMade’s inverted cone technology which makes the area that produces high ball speeds off the face larger for good distance even on off-centre strikes.

Are TaylorMade R9 irons forgiving?

The R9 are great irons for those looking for forgiveness without sacrificing performance. The long irons are especially forgiving and for those of us who need that extra forgiveness but still want more control than the typical game improvement set these are a rock solid choice.

How does the TaylorMade R9 driver work?

The TaylorMade R9 driver gives you the option to change the face angle, loft and lie of the club, as well as the center of gravity. Simply put, you can adjust the setting to change the ball flight. So, for example, if you want to hit the ball higher, you can lower the center of gravity and increase the loft.

How do you remove the tip of a TaylorMade R9 shaft?

Locate the bolt in the heel of the club directly above the shaft. Use the TaylorMade R9 wrench to turn the bolt counterclockwise, loosening it. Lift the club head from the shaft to expose the tip of the shaft and the Flight Control Technology sleeve.

How do you adjust a R9 driver for a straight ball?

Continue to hit golf balls at the driving range, making adjustments to the weights and FCT sleeve between every two or three balls. Keep making adjustments to the R9 driver until you find a combination of weights and FCT setting that produces a true, straight ball trajectory off the club face.

How do you remove the flight control technology on a TaylorMade?

Turn the driver over to expose the bottom of the driver head. Use the R9 TaylorMade white handled torque wrench provided with the driver and loosen the shaft bolt holding the shaft into the heel of the driver. Turn the bolt counterclockwise until you can lift the head off the shaft and expose the Flight Control Technology sleeve.