Admin Table of Contents
Does Google mesh work with modem router combo?
If you have a modem/router combo, simply just plug the ethernet cable into any one of the numbered ethernet ports on the combo unit. The Google WiFi unit will automatically power up.
Can Wi-Fi mesh work directly with a modem?
A mesh router system can’t work by itself. It still needs a modem, right? This is true. Even if you don’t pay for cable, you need to have a modem from an internet service provider (ISP).
Why isn’t my Google home connecting to Wi-Fi?
Make sure you’re using the latest version of the Google Home app. Next, power your Google Home off and then back on again by disconnecting and then reconnecting the power cable. Take the device you’re using for setup (the device you installed the app on), and turn the Wi-Fi off and back on.
How do I fix Google nest not connecting to Wi-Fi?
General troubleshooting
- Reboot the following devices: Wi-Fi router. Unplug the power source for ~1 minute and plug back in.
- Turn Wi-Fi on and off on the mobile setup device.
- If you have a dual band router, try to set up your speaker or display on both the 2.4 GHz and 5 GHz bands. Give feedback about this article.
How do I troubleshoot my Google Wifi devices?
Reconnect power to your Google Nest Wifi router or primary Google Wifi point and wait until it’s fully on. This takes about 1 minute. Reconnect power to any additional points or routers. Perform a mesh test to confirm your devices are working properly. Learn more about what the lights mean on your Google Nest or Google Wifi devices.
Why is my Google Nest not connecting to Wi-Fi?
Google Nest or Home device not connected to Wi-Fi network If you’ve lost your Wi-Fi connection or recently changed your Wi-Fi name, password or service provider, you may need to set up your Google Nest or Home speaker or display again. Follow the steps below to try fix the issue: Open the Google Home app.
Does the Google mesh work with WiFi turned on?
The Google Mesh should still work with WiFi turned on in the Telstra Gateway but it is best to turn WiFi off in Telstra Gateway to prevent it interference between the two WiFi Networks.
How do I set up my Google Wifi point?
Plug the power cord into the USB Type-C port. Plug the other end of the power cord into an available wall outlet. The light on your Google WiFi point will pulse blue once it is ready to be set up. Open the Google WiFi App.