Admin Table of Contents
How do I reset my satellite decoder?
To reset your receiver:
- Unplug the receiver’s power cord from the back of the receiver or from the wall outlet.
- Leave unplugged for 30 seconds and plug back in.
- The receiver should boot up properly in less than 90 seconds.
How do I update my satellite receiver firmware?
Download Receiver Software
- Press the MENU button two times or the HOME button three times, depending on your remote.
- Select Receiver.
- Select Tools.
- Select UPGRADE SOFTWARE.
- Select Upgrade Now on the confirmation popup. If you already have the latest software version, the receiver will display a message confirming this.
What is blind search in satellite receiver?
Blind scan uses no information from the satellite TP list in your receiver, it scans the LNB Band, 950-2150mhz and looks for TPs, it then uses the LNB Freq you entered to save what it finds as TP Freqs in your memory. Auto/regular scan uses the TP Freqs in your FTAs memory for the sat you are scanning.
Where is the reset button on my dish receiver?
On the left side of your receiver is a power button. Press and hold the power button for ten seconds then release, your receiver will reset. Some receiver models have a door, press on it and it will fall down, behind this is a power button in the top left corner and reset button in the bottom left corner.
How do I reset my dish set top box?
- Press MENU Button.
- Press Right Arrow Key 3 Time and Go to the MY DISHTV.
- Press Down Arrow Key 6 Times and Go to TOOLS and Press OK.
- Press OK on Factory Reset Option and wait for STB Reboot.
How do I set my free to air decoder?
Free-to-air TV: How do I install a digital decoder?
- Remove the aerial cable from the back of the TV set and connect it to the socket marked ANT IN on the digital decoder.
- Connect one end of the video lead to the socket marked TV on the decoder and the other end to the TV.
What is receiver NIT search?
The NIT (Network Information Table) informs the end devices (receivers) about all existing signals in the network. Many receivers evaluate this information in order to be able to carry out a more efficient station search. If your NIT is in- complete, the missing programmes will then not be found by these receivers.
How do you scan a satellite TV?
How to scan your TV for digital channels in Ghana.
- Pick the remote control and press the “Menu” button.
- Scroll down to “Settings” and click on it.
- Scroll through the options till you get to “Channel Scan” OR “Rescan” OR “Tun” OR “Auto-tune”
- Select the “Auto Tuning” option.