What are the two vents on a stove for?

What are the two vents on a stove for?

The air vents on a multi fuel stove are used to control the fire. Controlling the supply of oxygen to the fire using the air vents helps to produce the most amount of heat from each piece of fuel.

What is the purpose of primary air control?

Wood Burning Stove Primary Air Control The aim of the primary air is to get the fire up to sufficient temperature for secondary combustion of gases to occur, so that the stove can begin to provide its optimal heat output.

What are the two vents above my fireplace?

Smoke Chamber – The area above the fireplace and below the flue, used to allow smoke to mix and rise into the flue. Top Air Vent – The top air vent on an Old Style Heatilator Fireplace returns heated air into the room. The cool air enters a vent at the bottom of the Heatilator.

What do the top and bottom vents on a log burner do?

Inside the wood burning stove The bottom vent is the primary vent and the top vent is the secondary vent. The vents let you adjust how quickly your fuel burns by controlling the air supply to the stove. On the top of the stove you’ll see a pipe coming out of the wood burner.

What is the top vent for on a stove?

Vents allow you to control the supply of oxygen reaching the fire within your stove, and by extension, allow you to control how fiercely (or not) the fire burns.

How do you use a dual fuel stove?

Open the door to your stove and place a firelighter on top of a bed of fuel, such as logs or coal. Cover this stack with kindling, then place more logs, coal, or briquettes around it. The firelighters should be lit directly, and once the fire begins burning consistently, add more fuel as required to keep it lit.

What is the top vent for on a log burner?

What is primary and secondary air?

Primary air pollutants: Pollutants that are formed and emitted directly from particular sources. Examples are particulates, carbon monoxide, nitrogen oxide, and sulfur oxide. Secondary air pollutants: Pollutants that are formed in the lower atmosphere by chemical reactions.

Why are there 2 switches for my gas fireplace?

May be for powering a wall recepticule. Common to find two wall switches in an electrical box. One for the fireplace and one for a recepticule in a wall outlet. Or the second switch does power the unit.

Should vents be open on log burner?

To keep a fire going in a wood burning stove, the air vents shouldn’t be fully open, but closed down enough so that enough air is being supplied to the fire to keep it going, without causing it to smolder.

Can you leave the door open on a log burner?

The doors of wood burning stoves are not designed to be open. You can use a wood burning stove with the door open, but it will lose control of the air flow into the stove, making it operate less efficiently and sending more heat up the chimney, rather than out into the room.