Admin Table of Contents
The F-150’s pump can be reactivated by resetting the cut-off button to enable start again. The inertia switch for a ford f150 is located on the front part of the passenger door, behind the footwell cover, which is underneath the glove box.
How do I get my Ford truck out of theft mode?
Key
- Insert the key into the driver’s side door lock.
- Turn the key once, but not all the way to unlock the door. Leave the key in this position for 40-60 seconds.
- Do this again, but turn the key in the opposite direction.
- Remove the key from the door, get into your Ford, and start the engine. The system should be reset.
How do I reset my F150 battery?
Pull and release the high beaM5 times. Press and release the brake pedal 3 times. If You’ve done this correctly, the battery light will flasH3 times within 15 seconds of completion.
What is an inertia switch F150?
The inertia switch is a safety item incorporated by Ford in the fuel system of its vehicles. It is not supplying power to the fuel pump in this position. When the reset button is pushed in (or down), then the inertia switch will let the voltage flow to the fuel pump.
How do I bypass f150 anti-theft?
First You will want to hold down the key for 30 seconds in the down position. That will tell the system You have the right key, and it will enable You to be able to bypass the car’s alarm system.
How do you start a Ford f150 without a key fob?
The easiest way to start a Ford F-150 without a key is to use a flat-head screwdriver as leverage. You simply put the flat head of the screwdriver into the ignition and turn it as you would your normal key.
How do you start a Ford truck with a key fob?
To remote start your vehicle:
- Press the Lock button on your key fob to lock all the doors.
- Press the Remote Start button (2X) twice. Steps must be done within 3 seconds. The exterior lamps will flash twice and the vehicle will start.