Admin Table of Contents
What is the switch on the back of my sewing machine?
On the right side of the machine (or sometimes the back) you will find the power switch, which also usually turns on a small light above the presser foot. This light is very useful to help you see small details while you’re sewing, so make sure it’s working.
Why is my sewing machine not turning on?
A power supply failure, bad outlet cord or a failed On/Off switch can prevent the sewing machine from powering up. Check the power supply first. If the electrical outlet is okay, unplug the sewing machine and check the outlet cord for damage. Replace the cord if it’s damaged.
What is an e1 error on a Brother sewing machine?
The foot controller was pressed (or the start/stop button was pressed if the foot controller is not connected) and the reverse/reinforcement stitch button was pressed while the presser foot is raised. Lower the presser foot lever before continuing the operation.
How do I know what model my brother sewing machine is?
located on the label attached to the back of the sewing machine. The other is the internal machine identification number that displayed beside “No.” on page 7 of the settings screen. Both numbers are different.
What turns the sewing machine on and off?
Power switch- turns the sewing machine on or off. Always turn it off when you finish sewing or when changing the needle. Presser foot- holds fabric in place while you sew.
How do you start and end a stitch on a sewing machine?
Put your fabric under your presser foot at the end of the seam and take 3 stitches forwards. Then press the reverse and take 3 stitches back on top of your original stitching line. Release the reverse lever and just stitch forwards normally.
What is an E5 error on a Brother sewing machine?
You receive the error message E5 when the start/stop button was pressed while the foot controller was connected. 1. Disconnect the foot controller, and then press the Start/Stop button. – Otherwise, operate the machine by using the foot controller.