How do you put transmission fluid in a Porsche Cayenne?

How do you put transmission fluid in a Porsche Cayenne?

Begin filling the transmission with the Porsche Cayenne transmission fluid. Adapt the fill hose from the pump to the transmission adapter. Allow around 6 – 7 liters of ATF to be pumped into the transmission. As fluid is being fed into the transmission start the vehicle.

Where is the oil dipstick in a Porsche Cayenne?

How to Check Oil in a Porsche. If you’re driving a new Porsche, then you may be surprised to know that there is no physical dipstick for you to check.

When should I change transfer case fluid?

If the fluid runs low or becomes contaminated, it can lead to failure of the differential. To avoid this issue, it is recommended that the transfer case fluid be changed periodically, normally every 30,000 miles, especially in vehicles that tow or use four-wheel drive often.

What is wrong with the Porsche Cayenne?

In February 2020, a class-action lawsuit was filed against Porsche. Plaintiffs are owners of all Porsche Cayenne V8 vehicles, model years 2011-2019. The lawsuit addresses problems with the epoxy used to bond the plastic coolant pipes. Over time, the adhesive tends to degrade even under regular driving conditions.

How do I change the transmission fluid in a Porsche Cayenne?

Purchase the proper transmission fluid for your Cayenne model. You can buy the transmission fluid at Porsche dealerships or have a dealership change the fluid for you. Only touch the transmission dipstick after you open the hood.

How do you check the transmission dipstick on a Porsche Cayenne?

Turn the engine off and open the hood of the Porsche Cayenne. Find the transmission dipstick located at the front of the car on the left side of the engine. You will know the transmission dipstick by the yellow handle. Pull out the dipstick without touching the engine.

Where to buy transmission fluid for Porsche?

You can buy the transmission fluid at Porsche dealerships or have a dealership change the fluid for you. Only touch the transmission dipstick after you open the hood. All engine components that are made of metal will be extremely hot. How to Add Automatic Transmission Fluid

How do I check the temperature of the transmission fluid?

Aim the pyrometer at the lower pan to get the correct measurement of 40 degrees Celsius. If the temperature exceeds this, you’ll need to re-install the fill plug and let the fluid and transmission cool back down. Need to buy parts for this project? Click here to order!