Admin Table of Contents
How do you remove the dash panel?
Remove the left side panel of the dash with the panel tool. Remove the lower dash panel. Carefully set it down, you don’t need to disconnect the wires. From the lower corners of the upper panel pry outward and upward and the whole thing will loosen.
How do I remove the fuse panel from the dash?
1. grab SOMETHING FLAT.HERE, HOLD UP… Remove the side cap. Use something that won’t scratch it to just pop it off. Pop off the fuse panel and unscrew this screw. You’ll need to remove this panel later to get the wire through.
How do you fix a broken dash?
There is a clip that attaches to the dash that isn’t in place. You’ll see it. Just carefully wedge it in first then clip the lower part of the upper dash in place. Put everything else back together as in reverse. Should take 10 minutes to fix.
How do you remove the center console side finisher?
Center console side finisher screw cover (LH/ RH) Remove the center console side finishers (1) (LH/RH). Remove the center console side finisher screw (A) (LH/RH). Release the clips using a suitable tool, then remove the center console side finisher. Remove the shift selector finisher (1).
How do you remove the center console?
Remove the center console screw cover (1) using a suitable tool and the center console screws (A) (LH/RH). Remove the remaining center console screws (A). Disconnect the harness connectors from the center console assembly and remove. Installation is in the reverse order of removal.
How do I replace the center console cup holder?
Release the center console cup holder finisher clips, then remove the center console cup holder finisher (1). Remove the center console screw cover (1) using a suitable tool and the center console screws (A) (LH/RH). Remove the remaining center console screws (A). Disconnect the harness connectors from the center console assembly and remove.