Admin Table of Contents
What do you do when your DSL light is blinking?
Additional Troubleshooting
- Try to “power cycle” the modem. Unplug the power cord from the back of the modem.
- If the DSL light is still blinking, there could be a problem with the phone cord or wall jack. Try using a different cord and /or a different jack.
What does a flashing WAN DSL light mean?
The WAN/DSL light flashing indicates DSL link is resynchronisation. The main link has probably dropped out and modem is on back up mode indicated by mobile mode light being green and light on front of modem being blue.
Why is my DSL light blinking red?
Modem DSL1 and 2 Lights The Internet light will be red if the DSL signal is not detected on the line. A support representative will need to assist you in resolving the line issue. The DSL light will blink green when searching for a signal from CenturyLink.
How do I fix my CenturyLink DSL connection?
Modem fixes:
- Make sure your modem is in a place that has good air circulation, and is away from heat sources.
- Reboot your modem manually or using the My CenturyLink app.
- Make sure your modem is updated with the latest firmware version.
- As a last resort, try resetting your modem to factory defaults.
Should the DSL light be flashing?
DSL LED will flash when the DSL modem/Gateway is trying to establish connection with your DSL service. It should flash for about 30 seconds for your DSL modem to connect and display a solid light. Try bypassing any splitters or other devices as they can sometimes cause interference with your DSL signal.
What does DSL mean on my router?
DSL is an initialism for “Digital Subscriber Line”, which is a technology that enables high-speed data transmission on ordinary twisted-pair telephone lines. In short, a DSL modem router converts the DSL line to an Ethernet connection and shares the wireless network directly.
What does red DSL light on modem mean?
The DSL light will be OFF if it doesn’t detect a network connection. The DSL light will turn solid RED if it can’t detect the CenturyLink equipment on the other end of the line.
Should my modem lights be blinking?
A blinking light means you are having difficulty connecting to the internet. Ensure all telephone cable connections are tight and secure and reboot the modem and router (if applicable). POWER: A solid green light indicates the unit is properly connected to power. A blinking red light indicates a possible modem failure.
Can DSL modem go bad?
Changes in technology can make a modem obsolete. Upgrades and changes to your internet service can make your modem unusable. Even though, in theory, it still has a lot of life left in it. So those new internet speeds you’re excited about might cost you a new modem.
Why is my DSL light flashing on and off?
To resolve flashing DSL or no light on DSL LED issue: DSL LED will flash when the DSL modem/Gateway is trying to establish connection with your DSL service. It should flash for about 30 seconds for your DSL modem to connect and display a solid light.
What does the dsdsl led mean?
DSL LED will flash when the DSL modem/Gateway is trying to establish connection with your DSL service. It should flash for about 30 seconds for your DSL modem to connect and display a solid light.
What do the indicator lights on my DSL modem mean?
Your DSL modem has several Indicator lights on the front, which can be used to diagnose installation and connection problems. The following describes how to interpret the indicator lights. –OFF: The DSL modem is not getting power. –Blinking green (slow): The DSL modem is undergoing POST (power-on self test). –Solid green: Power is on.
What does it mean when my DSL light is red?
The DSL light will turn solid RED if it can’t detect the CenturyLink equipment on the other end of the line. If it stays red for more than 30 seconds, see the troubleshooting instructions below. If the DSL light on your modem remains off , blinking, or red after a few minutes, there may be an issue with the network. Here are some things to try: