Admin Table of Contents
Why do you need a stair case wiring?
The main purpose of two-way switching connection is to connect and control AC appliances and equipments from two separate locations. It is mostly used in staircase wiring where a light bulb can be control (Switch ON / Switch OFF) from different places, no matter you are in the upper or lower portion of stair.
What is staircase switch?
Staircase switch enables delayed switching off of lighting on stairs, corridors, entrances, common areas or for delayed running of fans in the toilet or bathroom.
What is hospital wiring?
We call it “Hospital wiring circuit” by using only switches and lamps to control the lighting density of bulbs in a room especially for admitted patients in the hospital. In this circuit, we only use normal ON/OFF switches to control the lighting in three ways i.e. Maximum light, Medium light and Minimum light.
What is godown wiring?
Godown wiring uses to operate lamps/loads in a sequential manner, where only one load operates at a time. The advantage of the godown wiring is the previous load will be turned off when we normally switch ON the next load. In godown wiring, the loads are not controlled by a random switching.
Which type of wiring requires more Labour?
Metal conduit wiring requires more time. 4. Metal conduit wiring needs skilled labour. 5.
What are different types of wiring?
Types of Wires – There are several essential types of wire that one must know for understanding their place of usage.
- Triplex wires.
- Main feeder wires.
- Panel feed wires.
- Non-metallic sheathed wires.
- Single strand wires.
What is Corridor wiring?
In corridor wiring circuit, a lighting point is controlled from two different locations using 2-way switches. In corridor wiring circuit, a person can turn ON / OFF a lamp by entering or leaving the corridor. In short, it is a two way switching circuit to control the lighting from two different locations.
What is hostel wiring?
Hostel wiring circuit is especially designed and used for study hours by headmasters and wardens to convey the students to do their study instead of early sleeping. In hostel wiring circuit, there is a SPST (single pole single throw or one way or single way) switch installed as a master switch in the warden room.
Where is godown wiring used?
Godown wiring circuit is needed in tunnel like structures, warehouses, long passages, big godowns having lots of rooms and different portions. It was the best choice to save electricity and energy consumption where only one load i.e. light bulb can be operate at a time.
How many switches are required for godown wiring?
The traditional godown wiring method is explained here starting with the layout of a warehouse application. For simplicity, the warehouse has three lights and three switches with equal spacing in between.
What are the 3 types of wiring connection?
And there are three basic house wiring types that each outlet has points for, namely live wire, a neutral wire, and the ground wire.
https://www.youtube.com/watch?v=gWQpI0sPpBU