Can I use any speaker with my receiver?

Can I use any speaker with my receiver?

In short, yes basically any surround set will work. Just watch the ohm load. Most home receivers are only stable from 6ohm to 8ohm. If you go with 6-ohm speakers they will pull a little more power from the receiver and be a little louder.

Can I use Bose speakers with a Sony receiver?

Dignified. If u have a 2-wires cable coming from each speakers, and none of the speakers require an electricity plug, then yes. The Bose will sound exactly as before.

How do I connect my built in speakers to my receiver?

How to connect speakers to an Audio/Video (A/V) stereo receiver.

1. Turn off the A/V receiver.
2. Connect the speaker wires to the speaker terminals on the rear of the A/V stereo receiver. IMPORTANT:
3. Connect the other end of the speaker wires to the corresponding speakers.

How do I turn on the speakers on my Sony receiver?

How to select the Speaker B option on my A/V receiver.

1. Make sure that speakers are properly hooked up to the Front B speaker port of the receiver.
2. Using the supplied remote, pull up the menu of the A/V receiver and select Speaker Settings.
3. Under Speaker Settings, select Speaker Pattern.

Can I use my existing speakers with new receiver?

You can use almost any amplifier or receiver with your speakers. The 15 watt rating does not have much real-world significance because there are very few amplifiers rated at 15 watts or less, and more importantly, you are more likely to destroy speakers with an amplifier with too little power, not too much.

Will any speakers work for surround sound?

Fortunately, any speaker can be used for surround sound with the proper connection to a receiver with matching impedance ratings (ohms) and appropriate placement in your home theater space. You can establish a wired or a wireless connection between the speakers, but follow the equipment specs.

Can I connect my Bose speakers directly to my receiver?

Bose Cube Speakers can be used with any type of receiver. In fact, with no built-in module to power them, they were designed to be used with other receivers. You will want to find a receiver that matches the quality of your Bose Cube Speakers to get the highest functionality from the speaker system.

Can I connect my Bose speakers to another receiver?

You can connect your Bose speakers to almost any receiver. However, choose one to match the sound quality of your speakers.

Can you use new speakers with old receiver?

Can you use A and B speakers at the same time?

When running two pairs of speakers via the A+B main speaker outputs, impedance and power ratings should be as close as possible to the power of the amp. A speaker rated at 4 ohms will draw twice the current as a similar one rated at 8 ohms.

Why don t all my speakers work on my surround sound?

Increase the rear speaker volume or surround speaker settings to maximum. Try selecting a different size (small or large) for the rear surround speakers in the menu. Verify that the A/V receiver is set to a surround sound mode. For Dolby® ProLogic surround sound, the center-channel mode must be set to NORMAL or WIDE.

What can I do with old home theater speakers?

Disposing of old or broken home theater systems

1. Donate it to a local community organization.
2. Give it to Goodwill or the Salvation Army.
3. Recycle broken equipment.
4. Check out Greener Gadgets.
5. Use it as a backup system.
6. Take it to a local electronics store.
7. Sell it on eBay.
8. Build yourself an internet radio.