Admin Table of Contents
How can you prevent static sparks while filling your boats fuel tank quizlet?
While filling the fuel tank: Keep the nozzle of the fuel-pump hose in contact with the tank opening to prevent producing a static spark. Avoid spilling fuel into the boat’s bilge or the water. Never fill a tank to the brim—leave room to expand.
What safety precaution should you take while filling?
Safety Precautions
- Turn off the boat engine before filling the fuel tank.
- Don’t fill the gasoline tank completely.
- Take necessary measures to avoid fuel spillage and overflow.
- Have all passengers step off the boat before filling the tank.
What should you do when fueling an onboard boat with a portable tank?
Fueling portable containers
- Always refill your portable fuel containers on the pavement or dock to ensure a good ground.
- On the dock, put an absorbent pad under the container.
- Consider using a funnel.
- Ensure the nozzle stays in contact with the tank opening.
How often should you check the engine oil level on your boat?
Check the oil and fluid levels before every outing. Change the oil according to the owner’s manual. As the engine ages, increase the frequency of oil changes.
Why should a boats gas tank never be completely filled?
It’s important to never fill the tank of your boat beyond 90% full. This leaves room for gas to expand and avoids the potential for overflow. Ensure that all air vents and valves to the gas tank are open.
Why should a boat gas tank never be full?
Should you keep boat gas tank full?
Filling the Tank Marine engine manufacturers and technicians advise storing any boat with the fuel tank almost full, leaving just a little capacity to accommodate expansion of the fuel if the temperature warms. The tank “breathes” though its vent, and draws in air that is often very damp in the winter months.
How do I add fuel stabilizer to my boat?
Add Stabilizer First: Add the fuel on “top” the stabilizer. This helps to mix it in your tank. Add Stabilizer Pre-Haul: Add the winterization dose of stabilizer to your boat’s fuel tank before you haul the boat. Time the dose so that you still have a cruise or two left before final haulout.
Do you need to change the oil in your boat every year?
Oil lubricates moving parts in a motor. That is why it is important to change the oil regularly. This could be once a year for a boat not run often, or every 75 to 100 hours for one that is. Some boat owners change the oil every 50 hours, especially if they have a diesel.
How do you eliminate static charge from a bond?
Bonding will not eliminate the static charge, but will equalize the potential between the objects bonded so that a spark will not occur between them. The likelihood of a spark between the objects is then essentially eliminated. Bonding can be accomplished by attaching a conductive wire between the objects.
Why do static sparks occur in metal storage containers?
The rate of accumulation of static charge may be much greater than the liquid’s ability to transfer it to the grounded metal storage vessel. If the accumulated charge in the container builds up enough, a static spark may result when the liquid level approaches a body with a different potential.
What should you do if your boat capsizes but remains floating upside down?
Your boat capsizes but remains floating upside down. What should you do? Climb onto the bottom of the overturned boat. Who is responsible for avoiding a collision between two boats? What type of fire can be put out safely with water? Where would a boat produce the highest concentration of carbon monoxide?
How do you prevent static charge when transferring flammable liquids?
However, there are ways to reduce the potential for static charge build-up when transferring flammable liquids. The two most important ways to prevent static sparks are~ bonding and grounding. Bonding is done to eliminate the difference in electrical potential between two or more objects.