Admin Table of Contents
How big is a Ford Ranger back window?
The Ford Ranger’s rear window measures roughly 49 inches in width at the base, 43″ in width at the top and 14″ in height. The truck also provides up to 26.5 to 33.9 ft cubic feet of cargo space. The overall length of the Ranger measures 210.8″ with a width of 77.8″ and a height of 70.7″.
What generation is a 93 Ford Ranger?
Second generation
The Ford Ranger sold in the Americas is a range of pickup trucks manufactured and marketed by Ford in North and South America under the Ranger nameplate. Introduced in early 1982 for the 1983 model year, the Ranger is currently in its fourth generation….Second generation (1993)
| Second generation | |
|---|---|
| Model years | 1993–1997 |
What are the best years for Ford Ranger?
The 10 Best Ford Ranger Models of All-Time
- 1988 Ford Ranger Pickup 2WD. This truck might have been made way back in 1988, but it was built to last.
- 2000 Ford Ranger Pickup 2WD.
- 2003 Ford Ranger Pickup 4WD.
- 2010 Ford Ranger.
- 2001 Ford Ranger Pickup 2WD.
- 2008 Ford Ranger.
- 1994 Ford Ranger Pickup 2WD.
- 2011 Ford Ranger.
How much horsepower does a 1990 Ford Ranger have?
Used 1990 Ford Ranger XLT Specs & Features
| Engine | |
|---|---|
| Base engine size | 2.3 l |
| Base engine type | Gas |
| Cylinders | Inline 4 |
| Horsepower | 100 hp @ 4600 rpm |
What is the value of a 1993 Ford Ranger?
1993 Ford Ranger trade-in prices range from $132 – $1,201. Get a more accurate value for your car with the Edmunds appraisal tool.
How much weight can a 1990 Ford Ranger tow?
Extended cab models were available with a single bed choice and measured 193.7 inches long and weighed 3,128 pounds. Though petite, the Ranger was rated to carry up to 1,600 pounds in the regular-cab and 1,300 in the extended-cab form.
Is the Ford Ranger 4.0 V6 a good engine?
The 4.0L SOHC V6 is thirsty, but can last long with good care. As of March 2020, Consumer Reports rated the 2007, 2009 and 2011 Ranger ‘above average’ for reliability, although ‘Transmission Minor’ is marked as trouble spots.
What size wheels does a Ford Ranger take?
This page is a guide as to what size wheels your Ford Ranger takes, and how to measure wheels in general. The Ford Ranger, Bronco II and Explorer all have a 5×4.5 bolt pattern. The basic Ranger wheel diameter is either 14×6 or 15×7 inches.
What is the backspacing on a Ford Ranger 15×10?
Recommended backspacing on a 15×10 wheel is 4.00 inches with -38mm offset.* Center Bore listed for the Ranger ranges from 70.3 – 70.5 depending on the wheel manufacturer and chart you find. Wheels on a 1998+ 4×4 Ranger will not fit the front of a 1983-1997 4×4 Ranger.
What is the center bore on a Ford Ranger?
Center Bore listed for the Ranger ranges from 70.3 – 70.5 depending on the wheel manufacturer and chart you find. Wheels on a 1998+ 4×4 Ranger will not fit the front of a 1983-1997 4×4 Ranger. The center hole is too small for the locking hub to pass through.
What is a bead seat on a Ford Ranger?
The bead seat is the part of the wheel where the bead of the tire sits once the tire is inflated. The Ford Ranger and Bronco II have a 5×4.5 wheel bolt pattern. The diagram below will show you how to measure wheel bolt patterns.