Admin Table of Contents
What is the jaw of a vice used for?
vise, also spelled Vice, device consisting of two parallel jaws for holding a workpiece; one of the jaws is fixed and the other movable by a screw, a lever, or a cam. When used for holding a workpiece during hand operations, such as filing, hammering, or sawing, the vise may be permanently bolted to a bench.
How does a chain vise work?
Chain vises use a chain to secure the pipe. The pipe is held in a V-shaped support by a chain that clamps tightly around the pipe. The chain is usually made of high-tensile steel. Chain pipe vices work well with irregularly shaped pipes or other objects.
What are vice jaw plates?
Shop for Vices Jaw pads are soft-faced jaws which slip onto the surface of the vice’s original jaws to protect a workpiece from any damage. Jaw pads can also be referred to as soft inserts, fibre grips or cheeks, and are an ideal feature for protecting delicate or plated surfaces from any denting or marring.
What is a vice clamp?
An engineer’s vise, also known as a metalworking vise, machinist’s vise, or, informally, a “bench vise”, is used to clamp metal instead of wood. It is used to hold metal when filing or cutting. The vise may include other features such as a small anvil on the back of its body. Most engineer’s vises have a swivel base.
How is vice size determined?
This is determined by the length of the screw (which holds the jaws together), and the longer the screw, the further the sliding jaw can open from the stationary jaw. The opening indicates the maximum capacity of the jaws, meaning that the vice will not be able to clamp an object wider than this.
What is vice clamp?
An engineer’s vise, also known as a metalworking vise, machinist’s vise, or, informally, a “bench vise”, is used to clamp metal instead of wood. It is used to hold metal when filing or cutting. It is sometimes made of cast steel or malleable cast iron, but most are made of cast iron.
What is the function of the steel jaws on the vice?
There are two steel jaws on this vice which are hardened and having grooves on them. Its height is kept equal to the elbow of the artisan. Its body is made of cast iron or steel. Its size is taken from the width of the jaw. Its fixed jaw remains fixed and only the movable jaw moves and tightens the work when the spindle is tightened.
How does a bench vise work?
A bench vice has two parallel jaws which work together to firmly clamp an object and hold it in place. A threaded screw, which is connected to the jaws, runs through the body of the vice, and its movement is controlled by a handle, which is located on the outer end of a vice. Metal bench Vise is used to clamp metal instead of wood.
What is the use of Vice?
Vice is a job holding tools, which is used to hold the job firmly in the workshop. See in figure different types of vices which is used in workshop. It is fitted above the bench. There are two steel jaws on this vice which are hardened and having grooves on them.
What is the function of the fixed jaw?
Its fixed jaw remains fixed and only the movable jaw moves and tightens the work when the spindle is tightened. To hold the finish works, regular jaws (jaws) should be coated with aluminum, brass or copper to prevent the finish surface of the work from deteriorating. It is also called machine vice when it is fitted with a machine.