How do I turn off the maintenance light on my Integra?

How do I turn off the maintenance light on my Integra?

Reset oil service light Acura Integra

1. Reset the indicator by inserting the key in the slot below the indicator. Or.
2. Turn ignition to (II) do not start the engine.
3. Press and hold the RESET button on the bottom of the dash for more than 3 seconds until the reminder light turns off.

Why is my maintenance required light on Acura Integra?

the maintenance light is just there to inform you of an oil change or basically you need to check up on your engine for tune up or something.

How do you reset the maintenance light on a 1998 Acura Integra?

To reset the 1998 Acura Integra maintenance light, please follow these instructions:

1. Turn ignition to (II) – do not start the engine.
2. Press the RESET button located below and to the right of the steering column (feel for a soft spot) until light goes out.

How do you reset the maintenance light on a 94 Acura Integra?

1994-2001

1. Find the maintenance reminder unit (normally located inside the lower dash cover under steering column)
2. With the car in park and the ignition switch in the ON (II) position, press the reset button on the unit and hold it for more than 3 seconds.
3. The reminder light will then go OFF.

How do I turn off the maintenance required light on my Acura RSX?

Acura RSX Service Maintenance Required Light Reset

1. Turn off the Ignition.
2. Press and hold the TRIP BUTTON.
3. Turn ignition ON while pressing and holding the TRIP BUTTON.
4. When the MAINT REQ’D light turns off (reset).
5. Turn off the ignition, then start the engine to verify if the maintenance required light has been reset.

What is maintenance required Integra?

Every time you start the car, the maintenance required light will turn on for about six seconds to test the bulb, and then go out. A flashing maintenance required light comes on after 4,500 miles. This is the final reminder to bring your car in for service.

How do you reset the oil life on a 2006 Acura CSX?

Follow the instructions below to reset the service light on your Acura CSX:

1. Turn the ignition key to position “ON” (II) without starting the engine.
2. Press the Select/Reset button repeatedly until the “Oil Life Percentage” appears on the display.
3. Press and hold the button until the oil life percentage begins to blink.

What makes the maintenance required light come on?

The maintenance required light is notifying you that maintenance is required according to the driven distance on the vehicle’s maintenance schedule. Most often this just means your vehicle might be due for an oil change.

What does it mean when maintenance required light flashes when I turn my car on?

It’s basically just telling you that your car will need some kind of scheduled service soon. It could be an oil change, a tuneup, or maybe you need a new timing belt. When the light begins to flash at startup, you have about 500 miles or so to go before the next scheduled service.

How do I reset my maintenance light on my Acura?

To reset light, turn ignition switch to OFF position. Press and hold SELECT/RESET button located on right side of instrument cluster. While still holding button, turn ignition switch to ON (II) position, with engine off. Hold button until reminder light resets, after about 10 seconds.

How do I Turn Off the maintenance light on my car?

Insert the key and turn to the run position without starting the car. Keep holding the button in. The Maintenance Required Light will blink once and then in another 5-10 seconds. You can now release the button. Turn off the car and remove the key. When you turn on the car now, the Maintenance Required Light should be off.

How do you reset the maintenance light on a Toyota Corolla?

Give it a try. With the car off and key out, hold in the odometer select/reset button. Insert the key and turn to the run position without starting the car. Keep holding the button in. The Maintenance Required Light will blink once and then in another 5-10 seconds.

How do you reset the maintenance light on a Nissan Altima?

With the car off and key out, hold in the odometer select/reset button. Insert the key and turn to the run position without starting the car. Keep holding the button in. The Maintenance Required Light will blink once and then in another 5-10 seconds.

How do I Turn Off the maintenance required light on Acura RSX?

Here’s how to turn off the Maintenance Required Light (MRL) on an Acura RSX or other Acuras – this might work the same for other cars as well, like for a Honda. Give it a try. With the car off and key out, hold in the odometer select/reset button. Insert the key and turn to the run position without starting the car.