Admin Table of Contents
What is a presser foot lever?
A presser foot is an attachment used with sewing machines to hold fabric flat as it is fed through the machine and stitched. Presser feet are typically spring-hinged to provide some flexibility as the workpiece moves beneath it. Presser feet have two toes, one to hold the fabric down on either side of the needle.
How do I know if my sewing machine is low shank or high shank?
If the length from the bottom of the presser foot to the center of the screw is half an inch, you have a low shank machine. In the pictures you see a Pfaff machine and a Brother Innovis Anniversary. If you measure 1 inch or longer, you have a high shank machine.
What is presser foot tension on a sewing machine?
The presser foot is the footplate of a sewing machine that holds the fabric down onto the part that feeds it under the needle. The presser foot tension also known as pressure simply presses on the fabric so the sewing machine’s feed dogs can nicely pull the fabric through.
How do I adjust the pressure on my presser foot?
In case you have a knob, it usually comes with an indicator next to it. Pressing up or down the indicator will increase or reduce pressure on your presser foot. If your machine has a screw, use the screwdriver to turn the screw and change the presser foot tension. Turning the screw clockwise or towards a plus sign will create heavy pressure.
Will generic Viking snap on presser feet fit the Viking slant shank?
The generic Viking snap on presser feet will require the generic low shank and new longer presser foot screw. Generic feet, neither snap on or low shank, do not fit the older Viking slant shank and high shank models.
Will generic snap on and low shank feet fit these models?
Generic snap on and low shank feet will not fit these models. There is no ruffler available for these models. -These models have the older proprietary Viking high shank: Models 630, 620, 610, 190, 185, 180, 150, 120, 105, 100, 95 & 90; all of the genuine Viking snap on feet will fit, there is no walking foot or ruffler available for these models.